Carbon fibre vacuum infusion resin
General vacuum infusion system,
suitable for manufacture of wind blades, marine, yacht and automobile body etc.
Low mix viscosity, specially suitable for vacuum infusion process.
Good wettability to carbon fibre and glass fibre.
Flexible pot life (1h-4h) for different hardeners.
TLC-6010 | Data | Remark | Standard |
mix viscosity | 25℃ 120-220 MPa |
Cast resin | GB/T 22314-2008 |
Tg | ≥75 ℃ | GB/T 19466.2-2004 | |
Flexural strength | ≥100 MPa | GB/T 1447-2005 | |
Cure Profile | 25℃×24h 、60℃×3h+80℃×6h |
| |
Color | Colorless, yellowish or blue |
|