Vacuum infusion fast reinforcement epoxy resin
General vacuum infusion system, suitable for manufacture of wind blades,
marine, yacht and automobile body etc.
Low mix viscosity, specially suitable for vacuum infusion process.
Good wettability to carbon fibre and glass fibre.
Lower curing temperature and shorter curing time.
LT-5093 | Data | Remark | Standard |
mix viscosity | 25℃ ≤250[mPa·s] | Cast resin | GB/T 22314-2008 |
Tg | ≥75 ℃ | GB/T 19466.2-2004 | |
Flexural strength | ≥100 MPa | GB/T 1447-2005 | |
Cure Profile | 50℃×6h |
| |
Color | Colorless or yellowish |
|