Vacuum Infusion epoxy resin
Lloyd's (GL) certified products
General vacuum infusion system,
suitable for manufacture of wind blades, marine, yacht and automobile body etc.
Low mix viscosity, specially suitable for vacuum infusion process.
Good wettability to carbon fibre and glass fibre.
Long pot life, suitable for large blades.
LT-5088 | Data | Remark | Standard |
mix viscosity | 25℃ 200-300 [mPa·s] |
Cast Resin | GB/T 22314-2008 |
Tg | ≥70℃ | GB/T 19466.2-2004 | |
Flexural strength | ≥100MPa | GB/T 2567-2008 | |
Cure Profile | 50℃×4h+75℃×6h |
| |
Color | Colorless or yellowish |
|